Spacing between posts are as follows: woven wire – 14- to 16-foot spacing, high tensile wire – 16- to 90-foot spacing, and electric wire – 20- to 90-foot spacing.
What is the average distance between fence posts?
Typically, fence posts are spaced between six and eight feet apart. The corner posts are set first. To align all of the posts in between, stretch a line from each corner post to work as your guide.
Can fence posts be 10 feet apart?
Typical spacing is right around 8 feet between each post however different circumstances may call for different measurements and it is not uncommon to have spacing between posts reach up to 10 feet. Once you have a rough idea of your post layout start by digging your first hole.
Is 2 feet deep enough for fence posts?
The depth of the hole should be 1/3-1/2 the post height above ground (i.e., a 6-foot tall fence would require a hole depth of at least 2 feet).
How far off the ground should a fence be?
In most applications, a wood fence should be installed at least two inches off the ground. Your posts and rot boards (if you choose to install them) should be the only fence components that contact the ground.
What is the distance between T posts?
You should space your posts 8-12 feet apart as a general rule, although 10-12 feet apart is sufficient for 5-6 wire barbed fence. Position each post with the anchor plate at the bottom and perpendicular to the fence line.
Should fence posts be set in concrete?
Concrete is the most secure material for setting fence posts, especially if you have sandy soil. … Using premixed concrete rather than dry concrete will ensure ultimate security. While concrete is sturdy, it lacks the drainage of gravel and can trap moisture, ultimately leading to rot.
Can I put razor wire on my fence?
You can use razor wire only by itself or most popularly place and attach it on a fence system. Is razor wire effective? The multiple blades of a razor-wire fence are designed to make deep cuts to people who try to climb on so it has an effective psychological deterrent.
How many bags of concrete do I need for a 4×4 fence post?
Mix two 50lb bags of concrete with water in a mixing tub or 5-gallon bucket. Add concrete into the hole and around the 4” x 4”. Depending on your climate, let concrete set up for 24 – 48 hours.
Will wooden posts rot in concrete?
Simply setting the posts in concrete does create a condition that will accelerate rot in the bottom of the posts. With pressure-treated posts, the rot will be slow. … The concrete at the top should be sloped away from the post to grade level to avoid water pooling around the base.
How deep should a 8-foot fence post be?
In general, holes should be at least 3 feet deep for posts that extend 8 feet or more above ground level. Posts that extend 6 feet above ground level should have holes at least 2 1/2 feet deep.
Should I use 4×4 or 6×6 fence posts?
4×4 is perfect for these very standard fence dimensions. Normally 4×6 or 6×6 are needed for gates or extreme wind loads.